Mobile Bike Repair in Oakley,CA

Basic Safety Tune

$40

• Brakes and shifting adjusted, tires aired, bolts checked, chain lubed.
• Typical duration: 45 minutes.

Standard Tune-Up

$70

• Basic tune plus wheel true (on-bike), headset adjust, drivetrain clean.
• Typical duration: 60 minutes.

Full Overhaul

$140

• Full bearing service and deep clean. Great for older or heavily used bikes.
• Typical duration: 180 minutes.

E-Bike Tune Add-On

Varies

• Extra time for e-bike systems added to any tune (hub +$15 / mid-drive +$25 / diagnostics +$20).
• Typical duration: 20 minutes.
• Add-on service — can be added to other work.

Flat Fix – Front

$15

• Tube included.
• Typical duration: 20 minutes.

Flat Fix – Rear

$20

• Tube included.
• Typical duration: 25 minutes.

Tubeless Setup (Per Wheel)

$30

• Convert or refresh a tubeless setup on one wheel (sealant extra).
• Typical duration: 35 minutes.

Wheel True – On Bike

$20

• Minor truing with wheel on the bike.
• Typical duration: 30 minutes.

Wheel True – Off Bike

$30

• More precise truing with wheel in truing stand.
• Typical duration: 40 minutes.

Spoke Replacement

$25–$40

• Replace broken spoke(s) and re-true wheel (spoke cost extra).
• Typical duration: 40 minutes.

Hub Service (Per Hub)

$30

• Clean, inspect, and re-grease hub bearings (cup & cone style).
• Typical duration: 40 minutes.

Standard Wheel Build

$80

• Build a new wheel from hub, rim and spokes.
• Typical duration: 120 minutes.

Wheel Build with Spoke Sizing

$100

• Includes calculating spoke length and cutting spokes if needed.
• Typical duration: 120 minutes.

E-Bike / Fat Bike Wheel Build

$120

• Wheel build for heavier-duty or fat bike/e-bike wheels.
• Typical duration: 150 minutes.

Brake Adjust (Per Brake)

$10–$15

• Dial in lever feel and braking power.
• Typical duration: 20 minutes.

Derailleur Adjust (Per Derailleur)

$10–$15

• Smooth out shifting and stop chain skipping.
• Typical duration: 20 minutes.

Cable / Housing Replacement

$20

• Replace and adjust one brake or shifter cable & housing (parts extra).
• Typical duration: 35 minutes.

Bar Tape Install

$20

• Install new bar tape on drop bars.
• Typical duration: 40 minutes.

Accessory Install

$10–$25

• Racks, baskets, fenders, lights, kickstands and similar small add-ons.
• Typical duration: 30 minutes.

Chain Install & Sizing

$10

• Install and size a new chain.
• Typical duration: 20 minutes.

Cassette / Freewheel Install

$10

• Install new cassette or freewheel.
• Typical duration: 20 minutes.

Crank Install / Removal

$20–$30

• Install or remove crankset (labor only).
• Typical duration: 40 minutes.

Bottom Bracket Service / Replace

$30–$50

• Service or replace bottom bracket (parts extra).
• Typical duration: 60 minutes.

Full Drivetrain Deep Clean

$35

• Remove grime from chain, cassette, chainrings, and derailleurs.
• Typical duration: 60 minutes.

Rim Brake Pad Replacement (Per Brake)

$10

• Install pads and adjust braking (pads extra).
• Typical duration: 20 minutes.

Hydraulic Brake Bleed (Per Brake)

$30

• Bleed hydraulic brake and reset lever feel.
• Typical duration: 40 minutes.

E-Bike Brake Bleed Add-On

$5

• Additional time for e-bike brake systems.
• Typical duration: 10 minutes.
• Add-on service — can be added to other work.

Disc Pad Install + Rotor Prep (Per Brake)

$25

• Install new pads and prep rotor contact surfaces.
• Typical duration: 40 minutes.

Rotor Replacement (Per Rotor)

$15

• Replace brake rotor (parts extra).
• Typical duration: 25 minutes.

Brake Rub / Noise Diagnosis

$15

• Track down and fix brake rub or squeal.
• Typical duration: 25 minutes.

E-Bike Electrical Diagnostic

$40

• Diagnostic checks on e-bike electrical system.
• Typical duration: 60 minutes.

Motor Install / Remove

$60–$100

• Install or remove e-bike motor (hub or mid-drive).
• Typical duration: 120 minutes.

Controller Replacement

$50–$90

• Replace and configure e-bike controller.
• Typical duration: 90 minutes.

Throttle / PAS Sensor Install

$30–$60

• Install or replace throttle or pedal-assist sensor.
• Typical duration: 60 minutes.

Battery Connector / Wiring Repair

$40–$90

• Repair battery connectors or wiring issues.
• Typical duration: 90 minutes.

Kids Bike Tune

$20–$30

• Adjust brakes, gears (if any), and safety check for kids bikes.
• Typical duration: 45 minutes.

Training Wheels Install / Adjust

$10

• Install or adjust training wheels.
• Typical duration: 20 minutes.

Kids Flat Fix

$8–$12

• Flat repair on kids bike (tube extra if needed).
• Typical duration: 20 minutes.

Boxed Bike Assembly

$50

• Assemble a new bike out of the box and safety check.
• Typical duration: 90 minutes.

High-End Road / MTB Build

$140

• Custom build of high-end road or mountain bike.
• Typical duration: 180 minutes.

E-Bike Conversion Kit Install

$100–$200

• Install e-bike conversion kit on compatible bike.
• Typical duration: 240 minutes.

Basic Bike Clean

$15

• Basic wash and wipe-down of frame and wheels.
• Typical duration: 30 minutes.

Drivetrain Deep Clean Only

$35

• Deep clean of chain, cassette, chainrings, and derailleurs only.
• Typical duration: 60 minutes.

Full Detail & Polish

$55

• Full bike clean, detail, and polish.
• Typical duration: 90 minutes.

Service Call / Diagnostic Visit

$20

• Basic inspection and estimate, often rolled into other work.
• Typical duration: 20 minutes.

Rush / Same-Day Appointment

$20

• Add-on service — can be added to other work.

After Hours (6–9 PM)

$15

• Add-on service — can be added to other work.